Table of Contents

ugBASIC User Manual

EXPANSION MANAGEMENT LIST OF AVAILABLE BANKS

PURPOSE

This example prints the starting addresses and the size of all available memory banks. If the address is 0, this means that the bank cannot be reached directly with an access but only through the primitives made available by ugBASIC.

SOURCE CODE

 
 PROCEDURE example ON COCO3, C64REU
 
     CLS
     
     PRINT "BANK LIST"
     PRINT "---------"
     PRINT
 
     IF BANK COUNT = 0 THEN
         PRINT "Sorry, this target "
         PRINT "  does not have any memory bank"
     ELSE
         FOR i=0 TO BANK COUNT - 1
             IF i = BANK() THEN
                 PRINT "*";
             ELSE
                 PRINT " ";
             ENDIF
             PRINT i;") AT ";BANK ADDRESS(i);" ("; BANK SIZE(i);" bytes)"
         NEXT
 
         PRINT
 
         PRINT "* = actual bank selected"
     ENDIF
 
 END PROCEDURE
 
     example[] ON COCO3, C64REU
 

SOURCE FILE

HOW TO COMPILE AND RUN

The instructions here refer to compiling the example from the command line. For Microsoft Windows users we suggest using UGBASIC-IDE, which allows you to compile the example with just one click.

ATARI 400/800 family

In order to compile and run the example, you need to have the Altirra emulator, and in particular that the altirra executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.atari expansion_bank_01.bas -o example.xex
 altirra example.xex
 
 # Windows 
 ugbc.atari.exe expansion_bank_01.bas -o example.xex
 altirra example.xex

ATARI 600XL/800XL/1200XL/XG(SE) family

In order to compile and run the example, you need to have the Altirra emulator, and in particular that the altirra executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.atarixl expansion_bank_01.bas -o example.xex
 altirra example.xex
 
 # Windows 
 ugbc.atarixl.exe expansion_bank_01.bas -o example.xex
 altirra example.xex

Commodore 64

In order to compile and run the example, you need to have the VICE emulator, and in particular that the x64sc executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.c64 expansion_bank_01.bas -o example.prg
 x64sc example.prg
 
 # Windows 
 ugbc.c64.exe expansion_bank_01.bas -o example.prg
 x64sc example.prg

Commodore 64+REU

In order to compile and run the example, you need to have the VICE emulator, and in particular that the x64sc executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.c64reu expansion_bank_01.bas -o example.prg
 x64sc -reu example.prg
 
 # Windows 
 ugbc.c64reu.exe expansion_bank_01.bas -o example.prg
 x64sc -reu example.prg

Commodore PLUS/4

Using YAPE

In order to run the example, you need to have the YAPE emulator. In particular that the yape executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.plus4 expansion_bank_01.bas -o example.prg
 yape example.prg
 
 # Windows 
 ugbc.plus4.exe expansion_bank_01.bas -o example.prg
 yape example.prg
Using VICE

In order to run the example, you need to have the VICE emulator. In particular that the xplus4 executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.plus4 expansion_bank_01.bas -o example.prg
 xplus4 example.prg
 
 # Windows 
 ugbc.plus4.exe expansion_bank_01.bas -o example.prg
 xplus4 example.prg

Dragon 32

In order to compile and run the example, you need to have the XROAR emulator, and in particular that the xroar executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.d32 expansion_bank_01.bas -o example.bin
 xroar -rompath (your rom path) example.bin
 
 # Windows 
 ugbc.d32.exe expansion_bank_01.bas -o example.bin
 xroar.exe -rompath (your rom path) example.bin

Dragon 64

In order to compile and run the example, you need to have the XROAR emulator, and in particular that the xroar executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.d64 expansion_bank_01.bas -o example.bin
 xroar -rompath (your rom path) example.bin
 
 # Windows 
 ugbc.d64.exe expansion_bank_01.bas -o example.bin
 xroar.exe -rompath (your rom path) example.bin

PC128 Olivetti Prodest

In order to compile and run the example, you need to have the DCMOTO emulator, and in particular that the dcmoto executable is accessible.

Then, type this command on the command line and on the emulator:

 # Linux 
 ugbc.pc128op expansion_bank_01.bas -o example.k7
 dcmoto
 (choose BASIC 128)
 CLEAR,&H2FFF: LOADM"CASS:",R: EXEC
 
 # Windows 
 ugbc.pc128op.exe expansion_bank_01.bas -o example.k7
 dcmoto
 (choose example.k7)
 (choose BASIC 128)
 CLEAR,&H2FFF: LOADM"CASS:",R: EXEC

Thomson MO5

In order to compile and run the example, you need to have the DCMOTO emulator, and in particular that the dcmoto executable is accessible.

Then, type this command on the command line and on the emulator:

 # Linux 
 ugbc.pc128op expansion_bank_01.bas -o example.k7
 dcmoto
 (choose BASIC 128)
 CLEAR,&H2FFF: LOADM"CASS:",R: EXEC
 
 # Windows 
 ugbc.pc128op.exe expansion_bank_01.bas -o example.k7
 dcmoto
 (choose example.k7)
 (choose BASIC 128)
 CLEAR,&H2FFF: LOADM"CASS:",R: EXEC

Commodore VIC-20

In order to compile and run the example, you need to have the VICE emulator, and in particular that the xvic executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.vic20 expansion_bank_01.bas -o example.prg
 xvic --memory 24k example.prg
 
 # Windows 
 ugbc.vic20.exe expansion_bank_01.bas -o example.prg
 xvic --memory 24k example.prg

ZX Spectrum

In order to compile and run the example, you need to have the Speccy emulator, and in particular that the speccy executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.zx expansion_bank_01.bas -o example.tap
 Speccy example.tap
 
 # Windows 
 ugbc.zx.exe expansion_bank_01.bas -o example.tap
 Speccy example.tap

MSX

In order to compile and run the example, you need to have the openMsx or the BlueMSX emulator, and in particular that its executable is accessible.

Then, type this command on the command line:

openMSX
 # Linux 
 ugbc.msx1 expansion_bank_01.bas -o example.rom
 openmsx -cart example.rom
 
 # Windows 
 ugbc.msx1.exe expansion_bank_01.bas -o example.rom
 openmsx -cart example.rom
blueMSX
 # Linux 
 ugbc.msx1 expansion_bank_01.bas -o example.rom
 bluemsx example.rom
 
 # Windows 
 ugbc.msx1.exe expansion_bank_01.bas -o example.rom
 bluemsx example.rom

ColecoVision

In order to compile and run the example, you need to have the openMsx or the BlueMSX emulator, and in particular that its executable is accessible.

Then, type this command on the command line:

openMSX
 # Linux 
 ugbc.coleco expansion_bank_01.bas -o example.rom
 openmsx -machine \"COL - ColecoVision\" -cart example.rom
 
 # Windows 
 ugbc.coleco.exe expansion_bank_01.bas -o example.rom
 bluemsx -machine \"COL - ColecoVision\" example.rom
blueMSX
 # Linux 
 ugbc.coleco expansion_bank_01.bas -o example.rom
 bluemsx /machine \"COL - ColecoVision\" /rom1 example.rom
 
 # Windows 
 ugbc.coleco.exe expansion_bank_01.bas -o example.rom
 bluemsx  /machine \"COL - ColecoVision\" /rom1 example.rom

SEGA SC-3000

In order to compile and run the example, you need to have the BlueMSX emulator, and in particular that its executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.sc3000 expansion_bank_01.bas -o example.rom
 bluemsx /machine \"SEGA - SC-3000\" /rom1 example.rom
 
 # Windows 
 ugbc.sc3000.exe expansion_bank_01.bas -o example.rom
 bluemsx  /machine \"SEGA - SC-3000\" /rom1 example.rom

SEGA SG-1000

In order to compile and run the example, you need to have the BlueMSX emulator, and in particular that its executable is accessible.

Then, type this command on the command line:

 # Linux 
 ugbc.sg1000 expansion_bank_01.bas -o example.rom
 bluemsx /machine \"SEGA - SG-1000\" /rom1 example.rom
 
 # Windows 
 ugbc.sg1000.exe expansion_bank_01.bas -o example.rom
 bluemsx  /machine \"SEGA - SG-1000\" /rom1 example.rom

ANY PROBLEM?

If you have found a problem trying to run this example, if you think there is a bug or, more simply, you would like it to be improved, open an issue for this example on GitHub. Thank you!

POWERED BY